- Overview
- Product Features
- Application
- Specification
- FAQ
Basic Info.
Product Description
OM 2 bending insensitive multimode fiber met or outperformed the ISO / IEC 11801-1 OM 2 specification, IEC 60793-2-10 A1-OM 2 specification and TIA-492AAAF A1-OM 2 specification.
OM 3 / OM 4 bending-insensitive multimode fiber met or outperformed ISO / IEC 11801-1 OM 3 / OM 4 specifications, IEC60793-2-10 A1-OM 3 and A1-OM 4 specifications and TIA-492AAAF A1-OM 3 and A1-OM 4 specifications.
*Excellent micro-bending resistance for tight cable cable performance superior in various environmental conditions;
*Very low macrobend sensitivity;*Optimized design for 850nm VCSELs;
*Compatible with the existing OM2 OM3 OM4 multimode fibers;
*Superior geometric consistency;
*Low attenuation;
*high broadband;
*Low differential mode delay (DMD);
*Support the use and installation of optical cables at a small bending radius;
*DC;
*Data storage network;*High-performance computing center;
*Office center;
*LAN;
*1 & 10 & 40 & 100 & 400 Gb / s Ethernet;
| Features | Conditions | Data | Unit |
| Geometrical Features | |||
| Core Diameter | -- | 50±2.5 | [μm] |
| Core out-of-roundness | -- | ≤5.0 | [%] |
| Cladding diameter | -- | 125.0±1.0 | [μm] |
| Non-circularity of cladding | -- | ≤1.0 | [%] |
| Coating diameter | -- | 245±7 | [μm] |
| Coating / cladding concentricity | -- | ≤10.0 | [μm] |
| Non-circularity of coating | -- | ≤6.0 | [%] |
| Core layer / cladding concentricity | -- | ≤1.5 | [μm] |
| Fiber length | -- | Maximum17.6 | [km/disk] |
| Optical characteristics | |||
| Damping | 850nm | ≤2.7 | [dB/km] |
| 1300nm | ≤0.6 | [dB/km] | |
| Full injection bandwidth | 850nm | ≥200 | [MHz·km] |
| 1300nm | ≥500 | [MHz·km] | |
| Full injection bandwidth | -- | 0.275±0.015 | -- |
| Group index | 850nm | 1.496 | -- |
| 1300nm | 1.491 | -- | |
| Zero dispersion wavelength | -- | 1320~1365 | [nm] |
| Zero dispersion slope | 1320nm≤ λ0 ≤1348nm | ≤0.11 | [ps/(nm2·km)] |
| 1348nm≤ λ0 ≤1365nm | ≤0.001(1458-λ0 ) | [ps/(nm2·km)] | |
| Macro bend loss | -- | -- | -- |
| 100 laps, with radius 37.5mm | 850nm | ≤0.50 | [dB] |
| 1300nm | ≤0.50 | [dB] | |
| Backscattering characteristics of 1300nm | |||
| Steps (average of bidirectional measurements) | -- | ≤0.10 | [dB] |
| Irregularities and point discontinuity in the length direction | -- | ≤0.10 | [dB] |
| Inhomogeneity of attenuation | -- | ≤0.10 | [dB/km] |
| Environmental characteristics of 850nm and 1300nm | |||
| Additional attenuation of the temperature cycle | -60ºC~ 85ºC | ≤0.10 | [dB/km] |
| Additional attenuation of the temperature-humidity cycle | -10ºC ~85ºC,4%~98% relative humidity | ≤0.10 | [dB/km] |
| Immersion additional attenuation | 23ºC, 30 days | ≤0.10 | [dB/km] |
| Dry heat additional attenuation | 85ºC,30days | ≤0.10 | [dB/km] |
| Heat and heat attach attenuation | 85ºC and 85% relative humidity,30days | ≤0.10 | [dB/km] |
| mechanical properties | |||
| Screening tension | -- | ≥9.0 | [N] |
| -- | ≥1.0 | [%] | |
| -- | ≥100 | [kpsi] | |
| Coating stripping force | Typical average stripping force | 1.5 | [N] |
| Peak force | ≥1.3,≤8.9 | [N] | |
| Dynamic fatigue parameter (nd, typical value) | -- | 20 | -- |
1.What Kind of Company are We?
Shanghai Gengyun Industrial Co., Ltd., based on the development of technology forum OF telecom optical&electric cable equipment and materials(TOEM), is mainly engaged in investment, trade, and technical services in the field of telecom optical & electric cable.
We provide our customers with complete materials demand solutions, as well as overall solutions and customized services in factory design, equipment configuration, product development and raw material supply.
2.Is our product single?
We have quite a wide variety of products.
Our products contain raw materials for optical fiber & cable, telecommunication cable include PE, PVC, FRP, PBT, water blocking yarn, water blocking tape, optical fiber ink, optical fiber, steel plastic composite tape, aluminum plastic composite tape, aramid yarn, etc. and
equipment for cable manufacturing including high-speed fiber coloring and rewinding machine, fiber merging machine, fiber screening and rewinding machine, special fiber drawing machine, coating production line, high-speed cable forming production line. There are different models of products under each category, and customization is supported.
3.Are samples available?
For most raw materials and optical cables, we can provide samples, but you need to bear the shipping costs; for cable manufacturing equipment, we can provide factory test reports of various indicators
4.Why Choose Our Company?
Our company was established in 2008 and has 16 years of experience in the communications industry. We can provide professional optoelectronic cable solutions and support product customization. Our products and raw materials are 100% in line with industry standards. We have warehouses all over the country, such as Shanghai, Jiangsu, Qingdao, Beijing and so on.
- Excellent
- Excellent geometric uniformity and batch consistency
- Excellent radiation resistance
- W
- ide working temperature range and good full temperature stability
- Excellent birefringence effect
- Excellent long-term reliability
- geometric uniformity and batch consistency
- Excellent radiation resistance
- Wide working temperature range and good full temperature stability
- Excellent birefringence effect
- Excellent long-term reliab